Probes and Electrodes
Vernier pH Storage Solution Bottles
For use with Vernier pH Sensors, Tris-Compatible Flat pH Sensors, and Go Wireless™ pH.
Vernier Electrode Amplifier
Use amplifier to collect data from almost any electrode that has a BNC connector.
Vernier™ Electrode Support
Our Electrode Support is a great complement to the Vernier Stir Station, as well as a perfect holder for many sensors.
Metrohm USA Storage solution for all combined pH glass electrodes with reference electrolyte c(KCl) = 3 mol/L
Storage solution for all combined pH glass electrodes with reference electrolyte c(KCl) = 3 mol/L, 250 mL. Long-term storage in KCl damages the glass as it results in ever-increasing response times. The patented 6.2323.000 Storage solution for combined pH glass electrodes has been developed to solve this problem. If a combined pH glass electrode is kept in the Storage solution then the performance of the glass membrane does not change regarding response time and the alkali error. If c(KCl) = 3 mol/L is additionally used as the reference electrolyte then the optimized composition of the Storage solution guarantees that the pH glass electrode is always ready for immediate use. Conditioning before the measurement is not necessary, no matter how long the electrode has been stored.
Cole-Parmer Oakton Electrode Storage Solution; 500 mL
Keep your pH probes clean and properly stored for longevity with this storage solution that contains pepsin, removing grease and oil deposits from your electrodes. After cleaning, keep your electrodes in proper working condition with our storage solution.
Cole-Parmer Oakton Waterproof pH Electrode with ATC, Single-Junction, Epoxy-Body, Gel-Filled
Use with the following Oakton meters: pH 300/310, pH/CON 300, and pH/CON 510. Electrode Type: Single junction, Electrode Body Material: Epoxy, Reference Junction: Gel-filled, Temperature Compensation: Yes, ATC Connector: 6-pin waterproof, Connector: BNC.
METTLER TOLEDO 3P INDUSTRIAL Potassium Chloride | 7447-40-7 | MFCD00011360 | 6 x 250 mL
Potassium Chloride | Mol Wt: 74.55 | 7447-40-7 | MFCD00011360 | 6 x 250 mL
Metrohm USA LL UNITRODE PT1000
Unitrode with Pt 1000 (without cable - electrode head U) Bridge electrolyte type: c(KCl) = 3 mol/L Diaphragm: Fixed ground-joint diaphragm Electrode plug-in head: Metrohm plug-in head U Electrode slope: > 0.97 Electrode zero point: (mV) 0 ± 15 mV (pH = 7) Electrolyte flow rate: (μl/h) 3...30 Indicator electrode shape: Cylinder Indicator electrode type: Glass electrode Internal reference electrode type: LL system Max. installation length: (mm) 113 Measuring range: 0...14 Measuring unit: pH Membrane glass type: U Membrane resistance: 150...500 Min. immersion depth: (mm) 25 Plug for filling opening: Orifice Reference electrolyte type: c(KCl) = 3 mol/L Reference system: LL system Resistance: (kOhm) 5 SGJ sleeve: flexible SGJ sleeve Shaft diameter bottom (mm): 12 Shaft diameter top (mm): 12 Shaft material: Glass Temperature range, long-term: (°C) 0 ... 80 Temperature range, short-term: (°C) 0 ... 100 Temperature sensor: Pt1000
METTLER TOLEDO Electrolyte KCl 3 mol/l AgCl saturated | 250ml
Electrolyte KCl 3 mol/l AgCl saturated | 250ml